Anti Corrosive coatings

We offer environment friendly epoxy coatings, fittings and sealants for a wide range of industrial and commercial applications

  • industrial coatings
  • Anti corrosive coatings
  • Flexi-rigid coatings
  • Floor coatings
  • Wood coatings
  • Water proof coatings

Our products are designated to provide enhanced chemical resistance and, protection to alkalis, acid and solvents compared to a typical epoxy pack because its polymerized with unique inhibitors and phenolic resigns. For example it can resist HCL and sulphuric acid fumes and variants up to 60% concentration and caustic soda up to 50% which is almost twice the concentration resisted by a typical coating. Antioll also resists most of the solvents like meg, acetone, MIBK which is not typical of other coatings.

Specialty Coatings

    Product range is as follows:
  • Industrial Coatings
  • Industrial Coat SGA 104
  • Corrosive Coat SGA 140
  • Flexi Rigid Coat SGA 108
  • Civil & Construction Coatings
  • Floor Coat SGA 230
  • Wood Coat SGA 401
  • Water Proof Coat SGA 410
  • Marine Coatings
  • Wash Coat 320
  • Tie Coat 320M
  • Top Coat 500 M
  • Automobile Coatings
  • Auto Coat 302
  • Fillers & Sealants
  • Crack Filler SGA 230
  • Multi Purpose Sealant SGA 270

The predominant features of products are:

  • Environment Friendly
  • Anti- Corrosive
  • High Bonding Strength
  • Fire retardant and Self-extinguishing
  • Acid- Alkali Resistance
  • Customized Solution
  • Multi surface, Multi purpose
  • Food grade
  • The merits and benefits of products are:
  • High chemical resistance with cathodic protection
  • High abrasion resistance and impact
  • Extreme protection against saline corrosion
  • Bonding strength-tested to be one of the highest
  • Fire retardancy and self-extinguishing
  • Aqua hardener available – for damp setting
  • Special hardener- sets in temperatures between -40deg C and 250 deg C.
  • Use on any surface-steel concrete, wood etc.
  • Lower VOCs than recommended industry average for coatings.
  • Recommended maximum coating thickness for extreme corrosive environments is between 200 microns and 300 microns.
  • Coating coverage of 5-6 sqm at 100μ / kg on metal and 4-5 sqm on concrete.
  • Self-Priming – No primers or intermediate coats.
  • ISO 9001-2008, 14001-2004 and 18001-2007 certified

for more informationclick here